From owner-ml  Sat Nov  1 06:35:07 1997
Received: (from majordom@localhost)
	by qoole.com (8.8.5/8.8.5) id GAA27861
	for ml-outgoing; Sat, 1 Nov 1997 06:35:07 GMT
X-Authentication-Warning: qoole.com: majordom set sender to owner-qoole@qoole.com using -f
Received: from localhost (matt@localhost)
	by qoole.com (8.8.5/8.8.5) with SMTP id GAA27857
	for <ml@qoole.com>; Sat, 1 Nov 1997 06:35:02 GMT
Date: Sat, 1 Nov 1997 06:35:02 +0000 (GMT)
From: Matt Ayres <matt@qoole.com>
To: ml@qoole.com
Subject: Re: Exporting Maps
In-Reply-To: <199710302201.QAA01592@wpg-01.escape.ca>
Message-ID: <Pine.BSF.3.95q.971101063313.27388S-100000@qoole.com>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
Sender: owner-qoole@qoole.com
Precedence: bulk
Reply-To: ml@qoole.com
Status: RO


I'm guessing actually the problem is due to a possible bug in the entity
code in v2.10 for using different entity sets (assuming he is using a
different entity set).  I believe this problem is fixed in v2.16.

Matt

On Thu, 30 Oct 1997, Opiate wrote:

> what this probably is is that you have to many texture wads in your wad
> manager. remove what you dont need and give it another try. i ran into this
> problem when i had EVERYTHING I have (all 55 wads) in that wad manager.
> needless to say i'm down to about 8 now  :).
> 
> Opiate
> 
> ----------
> > From: Jon Worthy <jworthy@hs.linn.k12.mo.us>
> > To: ml@qoole.com
> > Subject: Exporting Maps
> > Date: Thursday, October 30, 1997 2:52 PM
> > 
> > I've just downloaded the Qoole 2.10 w/ setup, and now when I export BSP,
> > 86% through
> > exporting the map file I get an error "Got Signal SIGSEGV".  And it quits
> > ,and saves my level as #backup#.qle.  Also I get "The instruction at
> > 0045edca referenced memory at ffffffff	The memory could not be read
> from". 
> >  Then 2 WinQoole has performed an illegal operation and will not be
> > terminated
> > 
> > 


