Newsgroups: alt.games.quake
Date: Tue, 14 Apr 1998 22:46:49 -0400
From: "Walker . . . Texas Ranger" <tjwalker@ic.sunysb.edu>
X-Sender: tjwalker@sparky
To: Lupin <lupin@connexus.net.au>
Subject: Re: auto aim
In-Reply-To: <3526ff00.0@news.internex.net.au>
Message-ID: <Pine.SOL.3.96.980414224435.12712E-100000@sparky>
References: <3526ff00.0@news.internex.net.au>
MIME-Version: 1.0
Content-Type: TEXT/PLAIN; charset=US-ASCII
NNTP-Posting-Host: sparky.ic.sunysb.edu
X-NNTP-Posting-Host: sparky.ic.sunysb.edu
Lines: 37
Path: clanworld.com!news.webspan.net!news-spur1.maxwell.syr.edu!news.maxwell.syr.edu!news-peer.sprintlink.net!news-nysernet-15.sprintlink.net!newsfeed.nysernet.net!news.nysernet.net!news.sprintlink.net!Sprint!129.49.12.172!news.ic.sunysb.edu!sparky!tjwalker
Xref: clanworld.com alt.games.quake:27879


Just go to the console and type in "SV_AIM 0.xx" (no quotes but you MUST
put the underscore "_" in.)
Or on the last line of you auto.cfg file type "SV_AIM 0.xx" (see above)

Simple right?


On Sun, 5 Apr 1998, Lupin wrote:

> Hi
> sorry for the second post
> 
> hopeing someone can help me.
> How do i enable mouse aiming or auto aim in both quake and quake II?
> I dont mean setting +mlook.
> If you stand on steps and fire at someone standing at the bottom of the
> steps,
> the shot goes over the their head.
> How do i set autoaim so i dont have to enable
> mlook, then move mouse down to aim and does this work in deathmatch,
> quakeworld etc..
> 
> someone suggested to Set SV_AIM to  0.93 or lower.  Where am i putting that
> in config file, and whats the command to set that at console for quake one
> and two. Alos does someone have a list of the console comands for     QI and
> QII and what the lines in config mean?
> 
> 
> 
> Thanks
> Please reply to Lupin@connexus.net.au
> 
> 
> 
> 

